1. Home
  3. Materials Setting

Materials Setting

🧾 Materials Setting Guide

Welcome to our Materials Setting page. Here, you'll find recommended engraving and cutting parameters based on the type of material, laser source, and power output.

No matter which CarverAll machine you use, settings depend only on your laser module — not the model of your machine. Simply identify your laser type (e.g., 455nm/Diode 5W / 10W, 1064nm/Infrared 1W, or Fiber 4W / 20W) and match it with the material you’re working with.

Use this guide as a starting point and fine-tune settings as needed based on material thickness, surface texture, and your desired result.

⚠️ Important: Always perform a small test before full engraving to ensure optimal results and avoid material damage.

455nm Laser Parameters

455nm 2.5W Engraving Material Parameters (Not recommended for cutting)

Material Power Speed Interval (mm)
Kraft paper 100% 3000 mm/min 0.12
Plywood 100% 3000 mm/min 0.10
Solid wood 100% 3000 mm/min 0.10
Bamboo board 100% 3000 mm/min 0.10
Cork 100% 4000 mm/min 0.10
Transparent acrylic (blackened) 100% 5000 mm/min 0.10
Frosted glass (blackened) 100% 5000 mm/min 0.10
Leather (white, blackened) 100% 5000 mm/min 0.10
Silicone 100% 3000 mm/min 0.10
Pebble 100% 5000 mm/min 0.10
Ceramic (blackened) 100% 1500 mm/min 0.10
Aluminum plate (blackened) 100% 5000 mm/min 0.10
Stainless steel 100% 600 mm/min 0.10
White felt (blackened) 100% 2500 mm/min 0.10

455nm 5W Engraving Material Parameters

Material Power Speed Interval (mm)
Kraft paper 80% 5000 mm/min 0.12
Plywood 80% 5000 mm/min 0.10
Solid wood 80% 6000 mm/min 0.10
Bamboo board 80% 5000 mm/min 0.10
Cork 50% 5000 mm/min 0.10
Transparent acrylic (blackened) 30% 5000 mm/min 0.10
Frosted glass (blackened) 40% 5000 mm/min 0.10
Leather (white, blackened) 40% 5000 mm/min 0.10
Silicone 70% 5000 mm/min 0.10
Pebble 40% 5000 mm/min 0.10
Ceramic (blackened) 100% 3000 mm/min 0.10
Aluminum plate (blackened) 40% 5000 mm/min 0.10
Stainless steel 100% 2000 mm/min 0.10
White felt (blackened) 70% 5000 mm/min 0.10

455nm 5W Cutting Material Parameters

Material Power Speed Number of cuts
Plywood 3 mm 100% 250 mm/min 1
Plywood 5 mm 100% 120 mm/min 1
Plywood 8 mm 100% 200 mm/min 6
Plywood 10 mm 100% 100 mm/min 1
Solid wood 5 mm 100% 100 mm/min 3
Solid wood 12 mm 100% 100 mm/min 4
Black acrylic 10 mm 100% 100 mm/min 12
Black acrylic 15 mm 100% 100 mm/min 15
Felt (blackened) 3.5 mm 100% 100 mm/min 20
Leather 1 mm 100% 1000 mm/min 1
Medium-density fiberboard (MDF) 4.3 mm 100% 200 mm/min 6

455nm 10W Engraving Material Parameters

Material Power Speed Interval (mm)
Kraft paper 50% 5000 mm/min 0.10
Plywood 60% 5000 mm/min 0.10
Solid wood 70% 6000 mm/min 0.10
Bamboo board 70% 5000 mm/min 0.10
Cork 30% 5000 mm/min 0.10
Transparent acrylic (blackened) 30% 5000 mm/min 0.10
Frosted glass (blackened) 30% 5000 mm/min 0.10
Leather (white, blackened) 30% 5000 mm/min 0.10
Silicone 50% 5000 mm/min 0.10
Pebble 30% 5000 mm/min 0.10
Ceramic (blackened) 90% 6000 mm/min 0.10
Aluminum plate (blackened) 30% 5000 mm/min 0.10
Stainless steel 100% 5000 mm/min 0.10
White felt (blackened) 50% 5000 mm/min 0.10

455nm 10W Cutting Material Parameters

Material Power Speed Number of cuts
Plywood 3mm 100% 500 mm/min 1
Plywood 5mm 100% 250 mm/min 1
Plywood 8mm 100% 120 mm/min 1
Plywood 10mm 100% 200 mm/min 5
Solid wood 5mm 100% 200 mm/min 1
Solid wood 12mm 100% 70 mm/min 1
Black acrylic 10mm 100% 100 mm/min 5
Black acrylic 15mm 100% 100 mm/min 9
Felt (blackened) 3.5mm 100% 100 mm/min 9
Leather 1mm 100% 2000 mm/min 1
Medium-density fiberboard (MDF) 4.3mm 100% 200 mm/min 3

1064nm Laser Parameters

Optional Accessory: 1064nm 1W Engraving Material Parameters (Not recommended for cutting)

Material Power Speed Interval (mm)
Kraft paper 100% 300 mm/min 0.10
Transparent acrylic (blackened) 40% 7000 mm/min 0.10
Frosted glass (blackened) 30% 7000 mm/min 0.10
White leather (blackened) 100% 5000 mm/min 0.10
Silicone 100% 2000 mm/min 0.10
Pebble 100% 3000 mm/min 0.10
Ceramic (blackened) 100% 3000 mm/min 0.10
Aluminum plate (blackened) 50% 7000 mm/min 0.10
Stainless steel 70% 7000 mm/min 0.10
White felt (blackened) 100% 1000 mm/min 0.10
Black acrylic 100% 6000 mm/min 0.10
Copper plate 80% 7000 mm/min 0.10
Cork 100% 300 mm/min 0.10